A Laboratory Experimental Study on Enhancing the Oil Recovery Mechanisms of Polymeric Surfactants.

In order to evaluate the physical and chemical properties of polymer surfactants and analyze their oil displacement mechanisms, three types of poly-surfactant used in the Daqing oil field were chosen to be researched, and the oil displacement effects were studied using poly-surfactants of different viscosity, dehydrating rate, and core permeability. The main purpose is to determine the reasonable range of different characteristic indexes of polymeric surfactant flooding. The oil displacement effect of 15 cores was analyzed, and the effects of viscosity, the dehydrating rate of emulsion, and permeability on EOR (Enhanced Oil Recovery) were analyzed. The oil displacement mechanisms of polymeric surfactants were researched using a photolithographic glass core. This paper explores the mechanism underlying production enhancement as an EOR target, while simultaneously conducting laboratory tests to assess the physical and chemical properties of polymeric surfactants. The poly-surfactant agents exhibit a notable increase in viscosity, with the optimal displacement effect observed at a core effective permeability exceeding 400 mD, resulting in a potential EOR of 15% or higher. Moreover, at a viscosity ranging between 40 and 70 mPa·s, the total EOR can reach 73%, with the peak efficiency occurring at a viscosity of 60 mPa·s. The water loss rate of the emulsion, ranging between 30% and 70%, achieves optimal performance at 50%. The poly-surfactants' higher viscosity extends the oil sweep area, enhancing recovery efficiency, and noticeably reducing residual oil compared to water flooding. During poly-surfactant flooding, a substantial amount of residual oil is extracted and transformed into droplets. The rapid emulsification of the polymeric surfactant solution with crude oil forms a stable emulsion, contributing to its significant oil recovery effect. This research provides valuable technical support for EOR in thin and low-quality reservoirs of onshore multi-layered sandstone reservoirs.

Weizmannia coagulans BCF-01: a novel gastrogenic probiotic for Helicobacter pylori infection control.

The widespread prevalence of Helicobacter pylori infection, particularly in China, contributes to the development of gastrointestinal diseases. Antibiotics have limitations, including adverse reactions and increased antibiotic resistance. Therefore, identification of novel gastrogenic probiotics capable of surviving the acidic gastric environment and effectively combating H. pylori infection has potential in restoring gastric microbiota homeostasis. Five novel strains of human gastrogenic Weizmannia coagulans (BCF-01-05) were isolated from healthy gastric mucosa and characterized using 16S rDNA identification. Acid resistance, H. pylori inhibition, and adherence to gastric epithelial cells were evaluated in in-vitro experiments and the molecular mechanism explored in in-vivo experiments. Among the gastric-derived W. coagulans strains, BCF-01 exhibited the strongest adhesion and H. pylori inhibition, warranting further in-vivo safety evaluation. Through 16S rRNA sequencing of a mouse model, BCF-01 was determined to significantly restore H. pylori-associated gastric dysbiosis and increase the abundance of potential probiotic bacteria. Furthermore, BCF-01 enhanced mucosal tight junction protein expression and inhibited the TLR4-NFκB-pyroptosis signaling pathway in macrophages, as demonstrated by qRT-PCR and western blotting.These findings highlight the potential of BCF-01 in the prevention and control of H. pylori infection. Specifically, treatment with BCF-01 effectively restored gastric microecology and improved H. pylori-mediated mucosal barrier destruction while reducing inflammation through inhibition of the TLR4-NFκB-pyroptosis signaling pathway in macrophages. BCF-01 is a promising alternative to traditional triple therapy for H. pylori infections, offering minimal side effects with high suitability for high-risk individuals.

Fractional quantum anomalous Hall effect in multilayer graphene.

The fractional quantum anomalous Hall effect (FQAHE), the analogue of the fractional quantum Hall effect1 at zero magnetic field, is predicted to exist in topological flat bands under spontaneous time-reversal-symmetry breaking2-6. The demonstration of FQAHE could lead to non-Abelian anyons that form the basis of topological quantum computation7-9. So far, FQAHE has been observed only in twisted MoTe2 at a moiré filling factor v > 1/2 (refs. 10-13). Graphene-based moiré superlattices are believed to host FQAHE with the potential advantage of superior material quality and higher electron mobility. Here we report the observation of integer and fractional QAH effects in a rhombohedral pentalayer graphene-hBN moiré superlattice. At zero magnetic field, we observed plateaus of quantized Hall resistance [Formula: see text] at v = 1, 2/3, 3/5, 4/7, 4/9, 3/7 and 2/5 of the moiré superlattice, respectively, accompanied by clear dips in the longitudinal resistance Rxx. Rxy equals [Formula: see text] at v = 1/2 and varies linearly with v, similar to the composite Fermi liquid in the half-filled lowest Landau level at high magnetic fields14-16. By tuning the gate-displacement field D and v, we observed phase transitions from composite Fermi liquid and FQAH states to other correlated electron states. Our system provides an ideal platform for exploring charge fractionalization and (non-Abelian) anyonic braiding at zero magnetic field7-9,17-19, especially considering a lateral junction between FQAHE and superconducting regions in the same device20-22.

Prussian blue analogue-derived Co3O4/Fe2O3 with a partially hollow and octahedral structure for high-performance supercapacitors.

A supercapacitor (SC) is considered as a promising energy storage device because of its high power density, fast charging/discharging speed and long cycle life. The transition metal oxides prepared by traditional methods face some challenges, such as low conductivity and uncontrollable pore size distribution. Therefore, we have prepared Prussian blue analogues (PBAs) using a coprecipitation method. By adjusting additives in the experimental process, uniform PBAs with a series of regular morphologies and structures are successfully prepared. Then the corresponding metal oxides are obtained by calcining precursors. We systematically study the influence of the morphology and structure of metal oxides Co3O4/Fe2O3 derived from PBAs on their electrochemical performance. The metal oxide with a partially hollow and octahedral structure shows excellent electrochemical performance. In a neutral electrolyte, the specific capacitance is 659.7 F g-1 at a current density of 0.5 A g-1. After 6000 cycles, the capacitance retention rate is 63.7%. An asymmetric supercapacitor (ASC) is constructed using Co3O4/Fe2O3 with an octahedral structure (CFMO-PVP-2) as the positive electrode and YP-50F as the negative electrode. The maximum energy density is 31.4 W h kg-1 at a power density of 1921 W kg-1. The maximum power density is 8421 W kg-1 at an energy density of 23.5 W h kg-1. The excellent electrochemical performance is attributed to the low resistance (Rw and Rct) and high DOH- derived from the oxide particles on the surface and within the inner parts of the octahedron, which are available for electron transport. Meanwhile, the open void between adjacent nanoparticles allows the electrolyte ions to diffuse more efficiently and ensures a much more effective area for participating in a reaction. The strategy will give new insights into designing high-performance SCs based on PBAs.

Isolation and characterization of Indigenous Bacilli strains from an oil refinery wastewater with potential applications for phenol/cresol bioremediation.

Phenolic compounds are frequently occurring in wastewaters from various industrial processes at high concentrations, imposing prominent risk to aquatic biosphere and human health. Bioremediation has been proven to be an effective approach to remove these compounds, and hunting for functional organisms is still of primary importance to develop efficient processes. In this study, we report several newly isolated bacillus strains with superior performances in metabolizing phenols, one of which showed paramount efficiencies to metabolize phenol at concentrations up to 1200 mg L-1 and could simultaneously degrade a wide range of other phenolic compounds. The genes encoding for phenol hydroxylase (PH) and catechol-2,3-dioxygenase (C23O) have been detected and characterized, evidencing that phenol degradation occurs via the meta pathway. The GC level of the PH gene was found to be much higher than that of genes from other Bacilli but was quite close to that of the genes from Rhodococcus, and the induction of both enzymes by phenols was confirmed by RT-PCR experiments. We intend to believe this novel strain might be promising to serve as preferred organisms for developing more robust and efficient bioremediation processes of degrading phenolic compounds due to its validated performance.

A four parallel laser-based simultaneous measurement method for 6-degrees-of-freedom errors of rigid body with translational motion.

The measurement of six-degrees-of-freedom (6-DOF) errors of rigid bodies can show the real and accurate spatial pose of those rigid bodies. It plays a major role in precision calibration, spacecraft docking, machining, assembly, etc. In this paper, a four parallel laser-based simultaneous measurement (FPL-SM) method is proposed for measuring 6-DOF errors of rigid bodies with translational motion. First, a FPL-SM device is introduced. Its four laser heads form a rectangle, which is perpendicular to the movement direction of the measured linear displacement. Second, identification formulas for all geometrical errors in rigid bodies with translational motion are presented based on the relative positions of the four lasers. Based on the readings of the four lasers, angular errors and corresponding straightness errors are calculated for the direction of motion around the other two linear motions. As the two parallel sides of the rectangle are in different planes, the straightness errors of the two planes are different. The rolling angular error in the direction is expressed as the difference between the straightness errors of the two planes divided by the distance between the two planes. Six fundamental errors for rigid bodies with translational motion are obtained by four lasers in a single setting of the device. For multiple rigid bodies with mutually perpendicular translational motion, the squareness error is calculated by fitting to the actual direction of motion. Finally, experiments were carried out on the SmartCNC_DRDT five-axis machine tool and 21 geometric errors were determined for three translational axes. Error compensation was carried out using the generated machine tool geometric error data to verify the effectiveness of the proposed FPL-SM method. In addition, geometric errors and thermal errors of the Z axis of the GTI-2740 machine tool are measured based on the FPL-SM method.

Ammonia Recovery from Wastewater as a Fuel: Effects of Supporting Electrolyte on Ammonium Permeation through a Cation-Exchange Membrane.

Electrodeionization (EDI) is used to recover ammonia from wastewater as a fuel, but how its performance for ammonia recovery is affected by the supporting electrolyte is not very clear. This study involved experimental tests and theoretical calculations on NH3 recovery, NH4 + permeation, and NH4 + and Na+ interacting with the functional groups in a cation exchange membrane (CEM) using Na2SO4 as the supporting electrolyte. The results demonstrated that a low concentration (≤0.250 mol L-1 of Na2SO4) was conducive to NH4 + permeation, while the a concentration (0.750 mol L-1 of Na2SO4) hindered NH4 + permeation. A maximum recovery efficiency of ammonia of 80.00%, a current efficiency of 70.10%, and an energy balance ratio of 0.66 were obtained at 0.250 mol L-1 of Na2SO4. Numerical results indicated that an increase in Na2SO4 concentration caused severe concentration polarization that resisted NH4 + migration in the CEM. The DFT results demonstrated that competitive adsorption of Na+ to the CEM hindered NH4 + migration. The weaker interacting force between NH4 + and the sulfonate functional group (-SOH3) in comparison to that between Na+ and -SOH3 might be related to the geometric and orientation effects, which generated an additional energy barrier for NH4 + transport. Therefore, this study suggests that the supporting electrolyte concentration should be matched with that of the desalted ions.

Spectroscopy signatures of electron correlations in a trilayer graphene/hBN moiré superlattice.

ABC-stacked trilayer graphene/hexagonal boron nitride moiré superlattice (TLG/hBN) has emerged as a playground for correlated electron physics. We report spectroscopy measurements of dual-gated TLG/hBN using Fourier transform infrared photocurrent spectroscopy. We observed a strong optical transition between moiré minibands that narrows continuously as a bandgap is opened by gating, indicating a reduction of the single-particle bandwidth. At half-filling of the valence flat band, a broad absorption peak emerges at ~18 milli-electron volts, indicating direct optical excitation across an emerging Mott gap. Similar photocurrent spectra are observed in two other correlated insulating states at quarter- and half-filling of the first conduction band. Our findings provide key parameters of the Hubbard model for the understanding of electron correlation in TLG/hBN.

Integrated anaerobic and algal bioreactors: A promising conceptual alternative approach for conventional sewage treatment.

Conventional sewage treatment applying activated sludge processes is energy-intensive and requires great financial input, hampering widespread implementation. The introduction of anaerobic membrane bioreactors (AnMBR) followed by an algal reactor growing species of commercial interest, may present an alternative, contributing to the envisaged resource recovery at sewage treatment plants. AnMBRs can be applied for organic matter removal with energy self-sufficiency, provided that effective membrane fouling management is applied. Haematococcus pluvialis, an algal species with commercial value, can be selected for ammonium and phosphate removal. Theoretical analysis showed that good pollutant removal, positive financial output, as well as a significant reduction in the amount of hazardous activated sludge can be achieved by applying the proposed process, showing interesting advantages over current sewage treatment processes. Microbial contamination to H. pluvialis is a challenge, and technologies for preventing the contamination during continuous sewage treatment need to be applied.

Accurate Measurement of the Gap of Graphene/h-BN Moiré Superlattice through Photocurrent Spectroscopy.

Monolayer graphene aligned with hexagonal boron nitride (h-BN) develops a gap at the charge neutrality point (CNP). This gap has previously been extensively studied by electrical transport through thermal activation measurements. Here, we report the determination of the gap size at the CNP of graphene/h-BN superlattice through photocurrent spectroscopy study. We demonstrate two distinct measurement approaches to extract the gap size. A maximum of ∼14 meV gap is observed for devices with a twist angle of less than 1°. This value is significantly smaller than that obtained from thermal activation measurements, yet larger than the theoretically predicted single-particle gap. Our results suggest that lattice relaxation and moderate electron-electron interaction effects may enhance the CNP gap in graphene/h-BN superlattice.

Aerobic methanotrophs in an urban water cycle system: Community structure and network interaction pattern.

Aerobic methane-oxidizing bacteria (MOB) play an important role in reducing methane emissions in nature. Most current researches focus on the natural habitats (e.g., lakes, reservoirs, wetlands, paddy fields, etc.). However, methanotrophs and the methane-oxidizing process remain essentially unclear in artificial habitat, such as the urban water cycle systems. Here, high-throughput sequencing and qPCR were used to analyze the community structure and abundance of MOB. Six different systems were selected from Yunyang City, Chongqing, China, including the raw water system (RW), the water supply pipe network system (SP), the wastewater pipe network system (WP), the hospital wastewater treatment system (HP), the municipal wastewater treatment plant system (WT) and the downstream river system (ST) of a wastewater treatment plant. Results clearly showed that the MOB community structure and network interaction patterns of the urban water cycle system were different from those of natural water bodies. Type I MOB was the dominant clade in HP. Methylocysis in Type II was the most abundant genus among the whole urban water cycle system, indicating that this genus had a high adaptability to the environment. Temperature, dissolved oxygen, pH and concentration significantly affected the MOB communities in the urban water cycle system. The network of MOB in WT was the most complicated, and there were competitive relationships among species in WP. The structure of the network in HP was unstable, and therefore, it was vulnerable to environmental disturbances. Methylocystis (Type II) and Methylomonas (Type I) were the most important keystone species in the entire urban water cycle system. Overall, these findings broaden the understanding of the distribution and interaction patterns of MOB communities in an urban water cycle system and provide valuable clues for ecosystem restoration and environmental management.

α-FeOOH nanowires loaded on carbon paper anodes improve the performance of microbial fuel cells.

Nanowires synthesized from metal oxides exhibit better conductivity than nanoparticles due to their greater aspect ratio which means that they can transmit electrons over longer distances; in addition, they are also more widely available than pili because their synthesis is not affected by the bacteria themselves. However, there is still little research on the application of metal oxides nanowires to enhance power generation of microbial fuel cells (MFC). In this study, a simple hydrothermal synthesis method was adopted to synthesize α-FeOOH nanowires on carbon paper (α-FeOOH-NWs), which serve as an anode to explore the mechanism of power generation enhancement of MFC. Characterization results reveal α-FeOOH-NWs on carbon paper are approximately 30-50 nm in diameter, with goethite structure. Electrochemical test results indicate that α-FeOOH nanowires could enhance the electrochemical activity of carbon paper and reduce the electron transfer resistance (Rct). Furthermore, α-FeOOH-NWs made the power density of MFC 3.2 times of the control device. SEM result demonstrates that nanowires are beneficial to the formation of biofilms and increase biomass on the electrode surface. Our results demonstrate that nanowires not only improve the electrochemical activity and conductivity of carbon paper but also facilitate the formation of biofilms and increase the biomass of the anode surface. These two mechanisms work together to boost extracellular electron transfer and power generation efficiency of MFC with α-FeOOH-NWs. Our study provides further evidence for the electrical conductivity of metal nanowires, promoting their potential applications in electricity generation such as MFC or other energy development fields.

Significant N2O emission from a high rate granular reactor for completely autotrophic nitrogen removal over nitrite.

Expanded granular sludge bed (EGSB) reactors were rarely applied for complete ammonium removal over nitrite. In this study, a high ammonium loading rate of 3677 mg N/L/d was achieved in an EGSB reactor. Approximately 5.5-8.5% of influent ammonium was converted to nitrous oxide (N2O) that is a potent greenhouse gas. Moreover, the percentage increased linearly with the increase in ammonium load. A model well matched the reactor dynamics. The model indicated that hydroxylamine (NH2OH) oxidation contributed to over 40% of produced N2O, and denitrification by ammonium oxidizing bacteria contributed to N2O emission significantly. Furthermore, the model suggests that a low oxygen concentration can result in a low N2O emission at the cost of a slightly low ammonium removal rate while influent organic matter play a minor role in reducing N2O emission. This study shows that EGSB reactors are effective in ammonium removal. In addition, the emission of N2O is significant.

Evaluating the effects of micro-zones of granular sludge on one-stage partial nitritation-anammox nitrogen removal.

The one-stage partial nitritation-anammox (PN-A) process is considered an efficient process for low-cost nitrogen removal. In this study, the nitrogen removal performance of different-sized granules in a one-stage PN-A reactor was studied. The total autotrophic nitrogen removal rate (TANRR) of the granular sludge increased as the granule size increased, and the TANRR of granular sludge with a radius larger than 500 µm reached 0.14 kgN kgVSS-1 d-1. High-throughput sequencing revealed that the abundance of ammonium-oxidizing bacteria and anaerobic ammonium-oxidizing (anammox) bacteria in granular sludge of different sizes differed, indicating that the bacterial community structure was affected by the granule size. The TANRR of different-sized granules was affected by the volumes of aerobic micro-zone and anaerobic micro-zone inside the granule. Appropriate micro-zone volumes inside the granules could be regulated by the dissolved oxygen (DO) concentration of the reactor, which are favourable for achieving a balance between partial nitritation and anammox and then satisfactory nitrogen removal. Small-volume variations in the range of micro-zones have a significant influence on the balance between partial nitritation and anammox. The proper DO concentration required for different-sized granules to achieve better nitrogen removal differed. This study provides a novel perspective for understanding the effect of micro-zones of granular sludge on one-stage PN-A nitrogen removal.

Exploring the feasibility of sewage treatment by algal-bacterial consortia.

Current biological wastewater treatment is energy intensive. The application of algal-bacterial consortia to treat wastewater has recently attracted considerable attention because mechanical aeration is unnecessary. Therefore, algal-bacterial bioreactors are emerging as alternatives to activated sludge-based bioprocesses. Most studies have used a plate substratum to support the growth of algal-bacterial biofilms, which results in low reactor efficiencies. Usually, 2-10 days are required for targeted pollutant removal effects. Substratum structures can significantly influence reactor efficiencies. Indeed, substratum-free biofilms (granules) generally achieve high reactor efficiencies that rapidly form. 7-12 h are sufficient for a high-level pollutant removal efficiency. However, granule stability must be validated during long-term experiments (>1 year) involving real wastewater. In addition, the application of algal-bacterial membrane bioreactors represents a novel treatment approach. In membrane bioreactors, good reactor efficiencies and stabilities can be achieved. However, the maximum capacity of algal-bacterial membrane bioreactors requires further investigation. In addition, an accurate model for pollutant removal kinetics in algal-bacterial reactors is not yet available but is necessary for reactor control and up-scaling. The microbial and physical structures of algal-bacterial biofilms require more studies to clarify the system. Finally, the operational costs of algal-bacterial systems must be kept low in order to enhance their potential for sewage treatment at large scales. Good illumination control and recycling biomass for biodiesel or methane production could be applied to reducing the operation cost.

Feasibility of using a novel algal-bacterial biofilm reactor for efficient domestic wastewater treatment.

Current algal-bacterial consortia require high hydraulic retention times (HRTs, 2-10 days) to efficiently remove pollutants from domestic wastewaters. A novel algal-bacterial biofilm reactor was developed for a much lower HRT. The results showed that an HRT of 12 h ensured 90% removal of organic matter and ammonium, and phosphate removal was approximately 30%. Decreasing the HRT to 8 h significantly deteriorated the reactor's pollutant removal efficiencies and increasing the HRT to 24 h did not improve these efficiencies. Illumination, which was light source for algae, was provided by a LED light. Activity tests showed that organic matter and ammonium removal rates resulting from illumination were 70% and 50%, respectively, of the rates when dissolved oxygen concentration was maintained at 2 mg/L. Chemical oxygen demand (COD) removal rates resulted from illumination and aeration were 18.63 and 25.38 mg COD/L.h, respectively. The phosphate removal rate was 0.26 and 0.43 mg/L.h when illumination and aeration were applied, respectively. The ammonium removal rates were approximately 10,390 and 5000 mg [Formula: see text] when the reactor was aerated or illuminated, respectively. These two rates were significantly higher than reported nitrification rates. Moreover, the percentage of Oscillatoria sp. increased from below 10% to over 90% under the applied organic load and temperature, while the percentage of fast growing algae, Chlorella, chroococcus sp and Scenedesmus sp., decreased from over 90% to below 10%. These results showed that an algal-bacterial biofilm reactor with a low reactor footprint was developed.

Application of cadmium-doped ZnO for the solar photocatalytic degradation of phenol.

In this study, photocatalysis of phenol was studied using Cd-ZnO nanorods, which were synthesized by a hydrothermal method. The Cd-ZnO photocatalyst was characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy, and Fourier transform infrared (FT-IR) and UV-Vis spectroscopy. XRD patterns exhibit diffraction peaks indexed to the hexagonal wurtzite structures with the P63mc space group. SEM images showed that the average size of the Cd-ZnO nanorods was about 90 nm. Moreover, the nanorods were not agglomerated and were well-dispersed in the aqueous medium. FT-IR analysis confirmed that a surface modifier (n-butylamine) did not add any functional groups onto the Cd-ZnO nanorods. The dopant used in this study showed reduction of the bandgap energy between valence and conduction of the photocatalyst. In addition, effect of various operational parameters including type of photocatalyst, pH, initial concentration of phenol, amount of photocatalyst, and irradiation time on the photocatalytic degradation of phenol has been investigated. The highest phenol removal was achieved using 1% Cd-ZnO for 20 mg/l phenol at pH 7, 3 g/l photocatalyst, 120 min contact time, and 0.01 mole H2O2.

Underlying mechanisms of ANAMMOX bacteria adaptation to salinity stress.

Dealing with nitrogen-rich saline wastewater produced by industries remains challenging because of the inhibition of functional microorganisms by high salinity. The underlying mechanisms of anaerobic ammonium-oxidizing bacteria (AnAOB) exposed to salinity stress should be studied to investigate the potential of anaerobic ammonium oxidation (ANAMMOX) for applications in such wastewater. In this study, the total DNA from granular sludge was extracted from an expanded granular sludge bed (EGSB) reactor operated at 0, 15 and 30 g/L salinity and subjected to high-throughput sequencing. The nitrogen removal performance in the reactor could be maintained from 86.2 to 88.0% at less than 30 g/L salinity level. The microbial diversity in the reactor under saline conditions was lower than that under the salt-free condition. Three genera of AnAOB were detected in the reactor, and Candidatus Kuenenia was the most abundant. The predictive functional profiling based on the Clusters of Orthologous Groups of proteins (COGs) database showed that the inhibition of AnAOB under saline conditions was mainly characterised by the weakening of energy metabolism and intracellular repair. AnAOB might adapt to salinity stress by increasing their rigidity and intracellular osmotic pressure. The predictive functional profiling based on the Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway database revealed that the inhibition of AnAOB was mainly manifested by the weakening of intracellular carbohydrate and lipid metabolism, the blockage of intracellular energy supply and the reduction of membrane transport capacity. AnAOB might adapt to salinity stress by strengthening wall/membrane synthesis, essential cofactors (porphyrins) and energy productivity, enhancing intracellular material transformation and gene repair and changing its structure and group behaviour. The stability of the nitrogen removal performance could be maintained via the adaptation of AnAOB to salinity and their increased abundance.

Analysis of 17α-ethinylestradiol and bisphenol A adsorption on anthracite surfaces by site energy distribution.

17α-Ethinylestradiol (EE2) and bisphenol A (BPA) are highly toxic and widely detected endocrine-disrupting compounds (EDCs) throughout the world in surface waters. Adsorption is an effective way to remove EE2 and BPA from water. However, it is difficult to clearly explain the mechanism of adsorption theoretically only through classic adsorption models. In order to insight into the adsorption of EE2 and BPA, site energy distribution (SED) theory was introduced to investigate the adsorption of EE2 and BPA on heterogeneous surfaces. EE2 and BPA were adsorbed on un-anthracite (unmodified anthracite) and 4K anthracite (4 mol L-1 KOH-modified anthracite) in single- and bi-component systems under various temperatures and pHs. The results suggested that EE2 and BPA molecules first occupied the high-energy adsorption sites and then spread to low-energy adsorption sites. There were more high-energy sites on 4K anthracite, resulting in a higher adsorption capability for EE2 and BPA. Besides, increasing temperature and acidic environment were conducive to the EE2 and BPA adsorption. SED analyses indicated that, in neutral solutions, π-π electron donor-acceptor (EDA) interaction might be the primary mechanism for BPA adsorption, while ligand exchange, hydrogen bonds, and π-π EDA interaction might simultaneously work in the adsorption of EE2. It was possible that EE2 molecule was near perpendicular to surface, while BPA molecule was parallel to surface, resulting in the higher adsorption capacities of EE2. However, compared with EE2, BPA had outstanding competitive advantages in bi-component system because of the stronger π-π EDA interaction between BPA and anthracite.

Electrochemical surface passivation of LiCoO2 particles at ultrahigh voltage and its applications in lithium-based batteries.

Lithium cobalt oxide, as a popular cathode in portable devices, delivers only half of its theoretical capacity in commercial lithium-ion batteries. When increasing the cut-off voltage to release more capacity, solubilization of cobalt in the electrolyte and structural disorders of lithium cobalt oxide particles are severe, leading to rapid capacity fading and limited cycle life. Here, we show a class of ternary lithium, aluminum, fluorine-modified lithium cobalt oxide with a stable and conductive layer using a facile and scalable hydrothermal-assisted, hybrid surface treatment. Such surface treatment hinders direct contact between liquid electrolytes and lithium cobalt oxide particles, which reduces the loss of active cobalt. It also forms a thin doping layer that consists of a lithium-aluminum-cobalt-oxide-fluorine solid solution, which suppresses the phase transition of lithium cobalt oxide when operated at voltages >4.55 V.